Rutgers School of Engineering
Service
- PROFESSIONAL ACTIVITIES:
-
- Member, International Scientific Committee for International
Heat Transfer Conference-13, Sydney, Australia, August 2006.
- Chair, Heat Transfer Division, ASME, 2002-03 (Executive Committee Member, 1998-2004)
- Technical Program Representative, Heat Transfer Division,
Int. Mech. Engg. Congress and Expo. (IMECE), New York, Nov. 2001.
- Member, Committee on Long Range Directions and Issues, Heat Transfer
Division, ASME, 1996-99.
- Conference Co-Chairman, 2nd ISHMT-ASME Heat and Mass Transfer
conference, Surathkal, India, December 1995.
- Conference Chairman, ASME/AIChE National Heat Transfer Conference, San
Diego, CA, 1992
- ASME Program Representative, 1990 AIAA/ASME Thermophysics and Heat
Transfer Conference, Seattle, WA, June 1990
- Chairman, General Papers Committee, ASME Heat Transfer Division,
1986-88 (Member, 1984-86)
- Member of several other committees since 1974, particularly the
Committee on Heat Transfer in Fires and Combustion Systems (1983-89),
within the Heat Transfer Division, ASME
- EDITOR:
-
- Editor, Heat Transfer and Transport Phenomena, Computational Mechanics, Springer International, 2000-
- Managing Editor, Computational Mechanics, Springer International, 1994-2000.
- Associate Technical Editor, ASME Journal of Heat Transfer, 1993-99.
- Member, Editorial Board, International journal of Heat and Mass
Transfer and International Communications in Heat and Mass
Transfer, 2003-
- Member, Editorial Advisory Board, Numerical Heat Transfer, 1987 -
- Member, Editorial Board, International Journal of Numerical Methods for Heat and
Fluid Flow, Wiley, 1990-2003
- Member, Editorial Board, SADHANA, an international journal on
engineering sciences published by
Indian Academy of Sciences, Bangalore, India, 1992-2000.
- PATENTS:
-
- Methods and apparatus for heating articles, USA Patent No. 4032033 (with T.Y. Chu, P.F.
Lilienthal and G.M. Wenger), June 1977.
- Methods and apparatus for avoiding undesirable deposits in crystal growing operations,
USA Patent No. 4116642 (with T.Y. Chu, R.J. Lavigna, R.E. Reusser and G. Williams),
September 1978.
- SOFTWARE COPYRIGHTS:
-
Computer software for a wide range of practical problems in the areas of plastic extrusion,
solidification, cooling of electronic equipment, enclosure fires and thermal design have been
developed. Some of the copyrighted ones are:
- "SINGSEXT" Computer software for single-screw extruder in
down-channel formulation (with M.V. Karwe), TX 3-201-225, Dec. 2, 1991.
- "DIESEXT" Computer software for single-screw extruder with a die
(with M.V. Karwe, R.V. Chiruvella and A. Abib), TX 3-259-
929, Feb. 18, 1992.
- "CONEXT3" Computer software for single-screw extruder in axial
formulation with chemical conversion (with M.V. Karwe, R.V. Chiruvella
and A. Abib), TX 3-750-
205, March 14, 1994.
- "CONEXT" Computer software for single-screw extruder with
chemical conversion (with M.V. Karwe, R.V. Chiruvella and A. Abib), TX 3-785-
645, March 14, 1994.
- "TWINSEXT" Computer software for simulating twin-screw extruders (with R.V. Chiruvella and
J.L. Kokini), TX 4-305-310, April 22, 1996.
- "ELECTCOOL" Computer software for simulating electronic equipment
cooling (with Elias Papanicolaou), TX 4-406-292, October 15, 1996.
- "HEATFIBER" Computer software for modeling the furnace in an
optical fiber drawing process (with S.H.-K. Lee, S. Roy Choudhury, and
Z. Yin), TX 4-413-660, November 4, 1996.
- INDUSTRIAL INTERACTIONS:
-
- Consulting project from David Sarnoff Research Center, Princeton, on furnace design for thermal
processing of glass, 1989-1990.
- Consultant for several companies such as SRI international, A. T.
Kearney, Bell Telephone System, Hoechst-Celanese, and manufacturing industry.
- Provided computer software and interacted with several companies,
such as Air Liquide, Corning, and National Starch,
on numerical modeling of processes.
- Consultant in several litigation cases, particularly in the area
of fire safety and building air flows.
- THESIS GUIDED:
-
Advisor for 19 Ph.D. and 28 M.S. theses, with others in
progress. Guided the work of 12 Post-Doctoral and visiting scholars,
including some on Fulbright, Korean government and European fellowships.
- Member, International Scientific Committee for International
Heat Transfer Conference-13, Sydney, Australia, August 2006.
- Chair, Heat Transfer Division, ASME, 2002-03 (Executive Committee Member, 1998-2004)
- Technical Program Representative, Heat Transfer Division, Int. Mech. Engg. Congress and Expo. (IMECE), New York, Nov. 2001.
- Member, Committee on Long Range Directions and Issues, Heat Transfer Division, ASME, 1996-99.
- Conference Co-Chairman, 2nd ISHMT-ASME Heat and Mass Transfer conference, Surathkal, India, December 1995.
- Conference Chairman, ASME/AIChE National Heat Transfer Conference, San Diego, CA, 1992
- ASME Program Representative, 1990 AIAA/ASME Thermophysics and Heat Transfer Conference, Seattle, WA, June 1990
- Chairman, General Papers Committee, ASME Heat Transfer Division, 1986-88 (Member, 1984-86)
- Member of several other committees since 1974, particularly the Committee on Heat Transfer in Fires and Combustion Systems (1983-89), within the Heat Transfer Division, ASME
- Editor, Heat Transfer and Transport Phenomena, Computational Mechanics, Springer International, 2000-
- Managing Editor, Computational Mechanics, Springer International, 1994-2000.
- Associate Technical Editor, ASME Journal of Heat Transfer, 1993-99.
- Member, Editorial Board, International journal of Heat and Mass Transfer and International Communications in Heat and Mass Transfer, 2003-
- Member, Editorial Advisory Board, Numerical Heat Transfer, 1987 -
- Member, Editorial Board, International Journal of Numerical Methods for Heat and Fluid Flow, Wiley, 1990-2003
- Member, Editorial Board, SADHANA, an international journal on engineering sciences published by Indian Academy of Sciences, Bangalore, India, 1992-2000.
- Methods and apparatus for heating articles, USA Patent No. 4032033 (with T.Y. Chu, P.F. Lilienthal and G.M. Wenger), June 1977.
- Methods and apparatus for avoiding undesirable deposits in crystal growing operations, USA Patent No. 4116642 (with T.Y. Chu, R.J. Lavigna, R.E. Reusser and G. Williams), September 1978.
- "SINGSEXT" Computer software for single-screw extruder in down-channel formulation (with M.V. Karwe), TX 3-201-225, Dec. 2, 1991.
- "DIESEXT" Computer software for single-screw extruder with a die (with M.V. Karwe, R.V. Chiruvella and A. Abib), TX 3-259- 929, Feb. 18, 1992.
- "CONEXT3" Computer software for single-screw extruder in axial formulation with chemical conversion (with M.V. Karwe, R.V. Chiruvella and A. Abib), TX 3-750- 205, March 14, 1994.
- "CONEXT" Computer software for single-screw extruder with chemical conversion (with M.V. Karwe, R.V. Chiruvella and A. Abib), TX 3-785- 645, March 14, 1994.
- "TWINSEXT" Computer software for simulating twin-screw extruders (with R.V. Chiruvella and J.L. Kokini), TX 4-305-310, April 22, 1996.
- "ELECTCOOL" Computer software for simulating electronic equipment cooling (with Elias Papanicolaou), TX 4-406-292, October 15, 1996.
- "HEATFIBER" Computer software for modeling the furnace in an optical fiber drawing process (with S.H.-K. Lee, S. Roy Choudhury, and Z. Yin), TX 4-413-660, November 4, 1996.
- Consulting project from David Sarnoff Research Center, Princeton, on furnace design for thermal processing of glass, 1989-1990.
- Consultant for several companies such as SRI international, A. T. Kearney, Bell Telephone System, Hoechst-Celanese, and manufacturing industry.
- Provided computer software and interacted with several companies, such as Air Liquide, Corning, and National Starch, on numerical modeling of processes.
- Consultant in several litigation cases, particularly in the area of fire safety and building air flows.
Advisor for 19 Ph.D. and 28 M.S. theses, with others in progress. Guided the work of 12 Post-Doctoral and visiting scholars, including some on Fulbright, Korean government and European fellowships.
