Rutgers School of Engineering

Research

RESEARCH INTERESTS:


Interested in a wide variety of fundamental and applied problems which involve thermal transport processes. Have carried out detailed analytical, numerical and experimental studies in many areas. Though the focus has generally been on the underlying physical mechanisms, the important practical issues have also been considered in many cases. Some of the areas of particular interest have been:

  • Optical fiber drawing: Furnace drawing of optical fibers, neck-down profile, determination of wall temperature distribution, cooling of fibers, polymer coating, process-induced defects, experimental studies for validation and model development.

  • Thermal transport in extrusion of polymeric materials: Single and twin-screw extruders, flow in dies, chemical conversion, mixing, residence time, microstructurtal changes, powder flow, transients, modeling and experimentation.

  • Chemical vapor deposition: Thin film fabrication by chemical vapor deposition, modeling, simulation and optimization of reactors, deposition of silicon and titanium nitride, experimentation on flow, stability and heat transfer, continuous deposition systems.

  • Other methods for thermal processing of materials: Solidification, melting, continuous processing, hot rolling, heat treatment, soldering, crystal growing and casting.

  • Enclosure fires: Experimental study of ceiling jets, wall and corner flows, vent flows, buoyancy-driven flows in open shafts, spread of smoke and other combustion products, room fires, aircraft cabin fires, helium smoke simulation, and field and zone modeling of enclosure fires.

  • Computational and experimental heat transfer: Numerical modeling of convective transport, conjugate problems, variable properties, complicated geometries, phase change problems, open boundaries, free surface flows, and turbulent transport, using finite difference, finite volume and finite element methods. Velocity, temperature, concentration and heat flux measurements, flow visualization, time-dependent flows, and mass transfer measurements.

  • Natural and mixed convection: Stability, transition to turbulence, separation, wakes rising above heated bodies, interaction of buoyant flows with surfaces and with other similar flows, buoyant jet flows, thermal stratification, and mixed convection transport from heated surfaces.

  • Cooling of electronic equipment: Numerical and experimental simulation of isolated sources, conjugate heat transfer, oscillatory flows, wake interactions, forced air cooling, multiple sources, mixed convection over surfaces and in enclosures with heat sources.

  • Environmental flows: Heat rejection, thermal pollution, recirculation in bodies of water, plumes and jets, ambient stratification, penetrative flows, transport to ambient media

  • Energy storage and salt-gradient solar ponds: Numerical and experimental simulation, energy discharge and withdrawal, interface stability, thermal energy storage tanks, solar ponds.

  • Design and optimization of thermal systems:Knowledge-based design methodology, expert systems, iterative redesign, initial design selection, modeling, simulation and optimization, simulation-based design, and feasibility domain. Design Based on Computational and Experimental Modeling

    BIOGRAPHY


    YOGESH JALURIA


    Yogesh Jaluria is currently Board of Governors Professor at Rutgers, the State University of New Jersey in the Department of Mechanical and Aerospace Engineering. He received his B.S. degree from the Indian Institute of Technology, Delhi, India, in 1970, standing first in the Graduating class. He obtained his M.S. and Ph.D. degrees in Mechanical Engineering from Cornell University in 1972 and 1974, respectively. He worked at A T & T Bell Laboratories, Princeton, during 1974-76 and at the Indian Institute of Technology, Kanpur, India, during 1976-80, before joining Rutgers University in September 1980.

    Professor Jaluria has carried out research in several diverse areas, particularly natural and mixed convection heat transfer, enclosure fires, thermal processing of materials, environmental transport processes, design of thermal systems, computational heat transfer and energy systems. His work in USA has been extensively supported by Federal agencies, such as the National Science Foundation and the National Institute of Standards and Technology, by the State of New Jersey and by industry. In India, he was supported by the Council of Scientific and Industrial Research, the Department of Science and Technology, Steel Authority of India and by industry. He has also interacted with several industries and research centers in these research areas.

    Professor Jaluria is the author of over 350 technical publications, including over 150 in archival journals and 15 chapters in boooks. He has two patents in materials processing and some of his computer software has been copyrighted. He is the author of a graduate level book NATURAL CONVECTION HEAT AND MASS TRANSFER (Pergamon Press, 1980) and an undergraduate textbook COMPUTER METHODS FOR ENGINEERING (Prentice-Hall, 1988; Taylor and Francis, 1996). He is the first author of a graduate level book entitled COMPUTATIONAL HEAT TRANSFER (Hemisphere, 1986) and its greatly expanded and updated second edition (Taylor & Francis, 2003). He is also a co-author of a graduate book entitled BUOYANCY-INDUCED FLOWS AND TRANSPORT (Taylor and Francis, 1988). He is the author of another textbook DESIGN AND OPTIMIZATION OF THERMAL SYSTEMS (McGraw Hill, 1998). All these books have received outstanding reviews and the two books on Natural Convection have been translated into Russian. Professor Jaluria is also a coeditor of twelve conference proceedings and two special issues of archival journals.

    Professor Jaluria has received several honors and awards, including the 2003 Richard Henry Thurston Lecture Award from the Americal Society of Mechanical; Engineers, the 2002 Max Jakob Memorial Award from the American Institute of Chemical Engineers and the American Society of Mechanical Engineers (ASME) for distinguished work in heat transfer, the 2000 Freeman Scholar Award for the application entitled "Fluid Flow Phenomena in Materials Processing," from the American Society of Mechanical Engineers, the 1999 Worcester Reed Warner Medal for outstanding contribution to the permanent literature of engineering from the American Society of Mechanical Engineers, the 1995 Heat Transfer Memorial Award for Science for significant research contributions to the science of heat transfer from ASME, the 1994 Distinguished Alumni Award from the Indian Institute of Technology, Delhi, the 1979 Young Scientist Medal from the Indian National Science Academy, and a Certificate of Recognition from the National Institute of Standards and Technology. He has been invited as a Distinguished Lecturer to NATO Advanced Study Institutes, as Research Leader to an NSF workshop, as speaker to a Department of Energy sponsored workshop on solar ponds, as panelist to national conferences, as invited or keynote speaker to international conferences and as seminar speaker to many universities and research establishments.

    Professor Jaluria is a Fellow of the American Society of Mechanical Engineers (ASME) and a Member of the Combustion Institute and of the American Physical Society. He has been active as Committee Chairman, Program Chairman and Conference Chairman, within ASME. He served as a member of the Executive Committee of the Heat Transfer Division from 1998 to 2004, serving as Chair of the Division during 2002-2003. He has served as an Associate Technical Editor of the ASME Journal of Heat Transfer, and is presently an Editor for Computational Mechanics, an international journal published by Springer International. He is also a Member of the Editorial Advisory Board for Numerical Heat Transfer, International Journal of Heat and Mass Transfer, and International Communications in Heat and Mass Transfer.